Chimney Pots : Instructions for Use

  1. Once you have finished cladding or decorating your chimney stack, glue your Chimney Pots into position using PVA adhesive and leave to dry.
  2. Mix up some Mortar/Grout mix as per the instructions on the packet. Using a small knife or spatula spread the cement on to the top of the stack around the base of the chimney pots as flaunching. Leave to dry.
  3. For an older appearance use a water based black stain/paint to weather it.

For further information on this or any other product please contact us.
Telephone : 01243 533132 or Fax : 01243 538204 or Email : bricks@richardstacey.com