Coarse Grit/Flint : Instructions for Use
- Mix up some Mortar/Grout mix as per the instructions on the packet until you have a reasonably thick cream. Please note. While other grouts can give satisfactory results some DO NOT. We therefore recommend the use of our Mortar/Grout to assure a reliable realistic finish.
- Apply a layer of mortar to a small area (approx. 5" x 5") and push your grit into the mortar mix while it is still wet. Repeat, until the whole of the area is complete and allow to dry thoroughly.
- If required a second layer of mortar can be applied. First seal the grit with a 50/50 mix of PVA and water and leave to dry. Then apply the mortar mix, clean the grout from the grit using a cold damp cloth immediately, before allowing to dry.
For further information on this or any other product please contact us.
Telephone : 01243 533132 or Fax : 01243 538204 or Email : firstname.lastname@example.org