Ridge Tiles : Instructions for Use

  1. Once you have finished cladding or decorating your roof, glue your ridge tiles into position using PVA adhesive. Allow approx. 1mm joints if you intend to grout them in. Leave to dry.
  2. Ridge tiles can be cut, if laid flat, using a craft knife and a ruler, or shaped by rubbing on medium grade sandpaper. Special angles and sizes can be provided on request.
  3. If you are grouting in your ridge tiles then mix up some Mortar/Grout mix as per the instructions on the packet. Carefully fill your joints, masking any areas you do not wish to grout.

For further information on this or any other product please contact us.
Telephone : 01243 533132 or Fax : 01243 538204 or Email : bricks@richardstacey.com